CF2000 – Entry Level Fire Alarm Control Panel 1,2 Loop Addressable 2 Loop Control Panel Intelligent addressable systems

The Eaton Cooper CF2000D panel is an entry level intelligent addressable control panel which can be configured for either 1 or 2 loop operation. It serves as the optimum solution for buildings that require a simple to use addressable fire system with a single, non-networked panel.

This intelligent addressable control panel has an LCD display which provides a simple yet comprehensive, menu-driven, end user interface.

The CF2000’s ability to support Eaton’s cause and effect programming and a wide range of user controllable functions makes the panel suitable for a varied range of projects from small warehouses to small/medium office developments as well as many small industrial applications.

As with all Eaton Cooper intelligent addressable panels, the CF2000 uses “spur tolerant” soft addressing to minimize installation time and remove potential for errors often associated with many forms of manual addressing.

 

Key Features

Configure as a 1 or 2 loop panel
Up to 200 addresses per loop
Soft addressing
Menu-driven display
Multi-language selection capability
Integral battery and power supply
Flexible cause and effect programming

 

Specification

Code: CF2000
Description: 2 Loop Control Panel
Standards: EN54 Pt2 1997, A1:2006 EN54-4 1997, A1: 2002 & A2: 2006
Number of Loops: 2
Addresses per Loop: 200
Panel sounder circuits: 4 outputs 1A total (programmed in pairs – outputs 1&2, 3&4)
Class change facility: Operated by external, normally open, volt free contacts
Auxiliary relay: One set of change over contacts, operated in the event of fire activation
Auxiliary fire routing equipment output: Monitored 24Vdc, 30 mA (max)
Auxiliary fire protection equipment output: Monitored 24Vdc, 30 mA (max)
Auxiliary Fault routing equipment output: Monitored 12Vdc, 30 mA (max)
Output ports: RS485 and RS232 (for connection of repeaters etc.)
Mains input voltage: 230Vac +10% / -15%
System operating voltage: 24Vdc
Batteries: 2 x 12V 7Ah
Standby Duration: 24 hours (dependent on loop loading)
Operating Temperature: -5˚C to 40˚C
Humidity (Non-condensing): 0 to 93% (+2/-3%) RH
Construction: Back Box – Mild Steel,
Door – PC / ABS
Color: Graphite
Dimensions (HxWxD): 400mm x 320mm x 170mm
Weight (with batteries): 15kg
Ingress Protection: IP30
Cable Entry: Top: 20 cable entry knockouts (20mm)
Bottom: 4 cable entry knockouts
Rear: 3 cable entry knockouts & cut-out (125mm x
Category: